Configuración inicial Vyos Movistar FTTH
Comandos de configuración básicos de un router Vyos
Habilitamos que suene el altavoz interno al arrancar, el nombre del router, el acceso por SSH, el NTP y la zona horaria
set system option startup-beep
set system host-name router-1.ateinco.net
set service ssh port 22
set system ntp server 150.214.94.5
set system time-zone Europe/Madrid
set system console device ttyS0 speed '115200'Interfaces
Suponemos que nuestra interfaz LAN va a ser la eth1 y la WAN la eth0
set interfaces ethernet eth1 vif 6 description "Movistar_Data"
set interfaces ethernet eth1 vif 3 description "Movistar_VoIP"
set interfaces ethernet eth1 vif 2 description "Movistar_IPTV"
set interfaces ethernet eth1 description 'WAN'
set interfaces ethernet eth0 address 10.200.200.1/24
set interfaces ethernet eth0 description 'LAN'
set service dhcp-server shared-network-name LAN subnet 10.200.200.0/24 default-router 10.200.200.1
set service dhcp-server shared-network-name LAN subnet 10.200.200.0/24 name server 1.1.1.1
set service dhcp-server shared-network-name LAN subnet 10.200.200.0/24 range 0 start 10.200.200.64
set service dhcp-server shared-network-name LAN subnet 10.200.200.0/24 range 0 stop 10.200.200.128
set service dhcp-server shared-network-name LAN subnet 10.200.200.0/24 lease 86400Habilitar WAN Movistar
set nat source rule 100 outbound-interface eth1.6
set nat source rule 100 source address "10.200.200.0/24"
set nat source rule 100 translation address masquerade
set interfaces pppoe pppoe0 description "Movistar_ppoe"
set interfaces pppoe pppoe0 source-interface eth1.6
set interfaces pppoe pppoe0 authentication user "adslppp@telefonicanetpa"
set interfaces pppoe pppoe0 authentication password "adslppp"
set interfaces ethernet eth1 vif 6 address dhcp
set protocols static route 0.0.0.0/0 interface pppoe0Habilitar Movistar VoIP
set interfaces ethernet eth1 vif 3 address dhcpEsto nos dará una IP dinámica para la VoIP
Habilitar IPTV
En este caso la habilitaremos, pero en la TV, se nos asigna un IP estos datos aparecen en la config original del router
set interfaces ethernet eth1 vif 2 address 10.X.X.X/8